turntable belts

Belts for most turntables

We stock flat belts for most turntables as listed below. If your deck is not listed you can work out the length you need using 2 methods. Belt sizes are specified using the circumference which is the TOTAL length of the belt.

a) To measure the circumference you can take your existing belt and lay it flat against a ruler - measure the length and then double the measured figure - this will give you the circumference (i.e Total length).

b) Alternatively you can loop a length of thread or string round the sub-platter (or platter if belt runs on this) and pulley. This mimics the belt path - Measure the thread length and then subtract about 5mm to allow for belt stretch. This is the circumference you need.

Circumference of belt	Turntable	Price	Order
294 mm		£12.80
339 mm	Rega	£12.80
383 mm		£12.80
396 mm		£12.80
424 mm		£12.80
496 mm		£12.80
531 mm	Ariston RD40	£12.80
534 mm		£12.80
553 mm	Linn decks & Origin Live early models Note this belt fits Linns but is not supplied by Linn.	£12.80
584 mm		£12.80
603 mm		£12.80
612 mm		£12.80
647 mm		£12.80
659 mm		£12.80
688 mm		£12.80